July 12, 2019
REQUEST FOR QUOTATION
NEGOTIATED PROCUREMENT (TWO-FAILED BIDDINGS)
Project Title | : | Supply and Delivery of Various Hardware Supplies for First and Second Quarter (CY 2019) |
Approved Budget for the Contract(ABC) | : | Eight Hundred Sixty- Four Thousand One Hundred Twenty Pesos (PhP864,120.00) |
PRAS No. | : | 19-0169 – IAD
19-0212 – ICTS-NOMD 19-0238 – BAFE |
IB No. | : | 013-19-2F |
Date of Negotiations | : | July 16, 2019 (Tuesday), 9:00 A.M.
Apacible Hall 4th Floor , DA Main Building , Elliptical Road Diliman Q.C. |
Deadline and Venue for the Submission and Receipt of Quotation | : | July 23, 2019 (Tuesday),11:00 A.M.
Apacible Hall 4th Floor , DA Main Building , Elliptical Road Diliman Q.C. |
Schedule and Venue for the Opening and Preliminary Examination of Quotation | : | July 23, 2019 (Tuesday), 1:00 P.M.
Apacible Hall 4th Floor , DA Main Building, Elliptical Road Diliman Q.C. |
- MANDATORY REQUIREMENTS:
- Valid PhilGEPS Certificate of Registration and Membership under Platinum Category in accordance with Section 8.5.2 of the 2016 Revised IRR of RA 9184, if registered under the Platinum category; Provided that all of the eligibility documents submitted to PhilGEPS are maintained and updated
or
In case any of the eligibility documents submitted to PhilGEPS is not updated, combination of a PhilGEPS Certificate of Registration and Membership under Platinum Category, with any of the valid/updated Class “A” Eligibility Documents shall be submitted
- Securities and Exchange Commission (SEC) Registration Certificate for corporations, partnerships and/or joint ventures, Department of Trade and Industry (DTI) Registration Certificate for sole proprietorship, or Cooperative Development Authority (CDA) Registration Certificate for cooperatives;
- Valid Mayor’s Permit issued by the city or municipality where the principal place of business of the prospective bidder is located, or the equivalent document for Exclusive Economic Zones or Areas. In cases of recently expired Mayor’s/Business Permits, it shall be accepted together with the official receipt as proof that the bidder has applied for the renewal within the period prescribed by the concerned local government unit, provided that the renewed permit shall be submitted as a post-qualification requirement in accordance with Section 34.2 of the 2016 Revised IRR of R.A. 9184.
- Valid Tax Clearance Certificate per Executive Order (E.O.) No. 398, series of 2005, as finally reviewed and approved by the Bureau of Internal Revenue (BIR); and
- Audited Financial Statements (AFS), stamped “received” by the BIR or its duly accredited and authorized institutions, for the preceding calendar year. In case the AFS for the preceding calendar year is not yet available, said AFS should not be earlier than two (2) years from the deadline for the Submission and Receipt of Bids.
Provided that the bidder/s having the Lowest Calculated Quotation (LCQ)/Single Calculated Quotation (SCQ) submit/s a valid and updated PhilGEPS Certificate of Registration and Membership under Platinum Category within five (5) calendar days from receipt of the BAC notice of the LCB/SCB.
or
In lieu of the PhilGEPS Certificate of Registration and Membership under Platinum Category, bidders shall submit all of the valid and/or updated Class “A” Eligibility Documents; Provided that the bidder having the LCQ/SCQ submit/s a valid and updated PhilGEPS Certificate of Registration and Membership under Platinum Category within five (5) calendar days from receipt of the BAC notice of the LCQ/SCQ.
- Omnibus Sworn Statement in accordance with Section 25.3 of the IRR of RA 9184 and using the form prescribed by Government Procurement Policy Board; and
- Duly notarized Secretary’s Certificate issued by the corporation, Board/Partnership Resolution for partnerships, corporations and/or joint ventures, or a Special Power of Attorney (SPA) in case of sole proprietorships for situations where the signatory is not the sole proprietor/owner.
- INSTRUCTIONS TO BIDDERS:
- Bidders are required to read the instructions and fill all the blanks properly;
- Any specifications other than those required/stated in this form shall not be considered in the evaluation of bid;
- Quotation/s must include all kinds of taxes for the item(s)/services listed hereunder, including delivery charges;
- Price quotation/s submitted shall be valid for a period of one hundred twenty (120) calendar days from the deadline of submission and receipt of quotation;
- Terms of payment: within Thirty (30) calendar days upon receipt, inspection and acceptance of item/s.
- Quotation/s shall be submitted to the Procurement Division, 2nd Floor ICTS Building, DA Compound, Elliptical Road, Diliman, Quezon City;
- Only sealed canvasses shall be considered by the BAC.
- Bidders shall reflect on the envelope the IB No. and/or the PRAS/PR no., the BAC shall not be responsible on the pre-emptive/premature opening of the quotation;
- Bid envelopes that are not properly sealed and marked, as required in the Request for Quotation (RFQ), shall not be rejected, but the Bidder or its duly authorized representative shall acknowledge such condition of the bid as submitted. The BAC or the Procuring Entity shall assume no responsibility for the misplacement of the contents of the improperly sealed or marked bid, or for its premature opening.
- Bidders may submit their own canvass form in accomplishing their bid subject to the condition that this form shall be filled up (with unit price, total price, sub-total and grand total), signed properly and attached together with the Bidder’s/Supplier’s own canvass form;
- Awarding shall be done per LOT;
- Delivery period: Thirty (30) Calendar Days upon receipt of Purchase Order
- To guarantee the faithful performance by the winning bidder of its obligations under the contract, it shall post a performance security within a maximum period of ten (10) calendar days from the receipt of the Notice of Award from the Procuring Entity and in no case later than the signing of the contract;
- The Performance Security shall be denominated in Philippine Pesos and posted in favor of the Procuring Entity in an amount not less than the percentage of the total contract price in accordance with the following schedule:
- Failure of the successful bidder to comply with the above-mentioned requirement shall constitute sufficient ground for the annulment of the award;
- A warranty security shall be required from the contract awardee for a minimum of three (3) months, in the case of Expendable Supplies, or a minimum of one (1) year, in the case of Non-Expendable Supplies, after acceptance by the Procuring Entity of the delivered supplies;
- The obligation for the warranty shall be covered by either retention money in amount equivalent to at least one percent (1%) but not to exceed five percent (5%) of every progress payment, or a special bank guarantee equivalent to at least one percent (1%) but not to exceed five percent (5%) of the total contract price; and
- The said amounts shall only be released after the lapse of the warranty period or, in the case of Expendable Supplies, after consumption thereof: Provided, however, that the supplies delivered are free from patent and latent defects and all the conditions imposed under the contract have been fully met.
- The Uniform Guidelines for Blacklisting set forth in Appendix 17 of the 2016 Revised IRR of RA.9184 shall apply in case any of the violations listed under Items 4.1 and 4.2 thereof is/are committed without prejudice for forfeiture of performance security.
- The Department of Agriculture reserves the right to reject any and all bids, declare a failure of bidding, or not award the contract at any time prior to contract award in accordance with Section 41 of RA 9184 and its IRR, without thereby incurring any liability to the affected bidder(s).
- TECHNICAL SPECIFICATIONS:
Bidders are required to state either “Comply” or “Not Comply” against each of the individual parameters of each specification. The statement of “Comply” or “Not Comply” must be supported by evidence in a Bidders Bid and cross referenced to that evidence, when applicable.
Item No. | TECHNICAL SPECIFICATIONS | Quantity | “COMPLY” OR “NOT COMPLY” |
LOT 1: PROCUREMENT REQUEST ACTION SLIP (PRAS) NO.: 19-0169 – IAD | |||
1 | Extension Cords, 6 Outlets, 3 meters Cord | 6 pieces | |
LOT 2 : PROCUREMENT REQUEST ACTION SLIP (PRAS) NO.: 19-0212 – ICTS-NOMD | |||
1 | Pentalobe Screwdriver, 5 point 5-star, P2, P3, P4, P5, P6 | 6 sets | |
2 | Plastic Moulding, 1″ | 50 pieces | |
3 | Plastic Moulding, 11/2″ | 250 pieces | |
4 | PVC Electrical conduit pipe 3/4” | 15 pieces | |
5 | Electronics Contact Cleaner, 12.9 oz | 20 cans | |
6 | Penetrating Oil, 12.9 oz | 20 cans | |
7 | LED Bulb, 13 Watts | 50 units | |
8 | LED Flourescent Tube,T8, 36 Watts | 260 units | |
9 | Faucet, ordinary, brass | 5 units | |
10 | Torx, Precision Screw Driver, (T4-T10) | 5 units | |
11 | Contact Cleaner, 16 Oz. | 40 cans | |
12 | Super Glue-
|
24 pieces | |
13 | Door Knob
|
10 sets | |
14 | Thermal Paste, 30 grams, Syringe | 24 units | |
15 | Electrical Plier, 8″, U.S. | 5 units | |
16 | Electrical Side Cutter Plier, 6″ U.S. | 5 units | |
17 | Electrical Long Nose Plier, 6″ U.S. | 5 units | |
18 | Screw Driver, Philip Screw Head #1 U.S. | 5 units | |
19 | Screw Driver, Philip Screw Head, #3 U.S. | 5 units | |
20 | Flat Screw Driver, 10″ U.S. | 5 units | |
21 | Adjustable Wrench, #10 U.S. | 2 units | |
22 | Paint Brush 4″ | 8 units | |
23 | Hack Saw Blade | 5 units | |
24 | 3 Prong Convenient Outlet w/ cover | 60 pieces | |
25 | Electrical Wire, #18 Stranded | 2 boxes | |
26 | THHN Wire #12 | 2 boxes | |
27 | Flat Cord Wire #14 | 2 rolls | |
28 | Electrical Plug, Male Heavy Duty | 60 pieces | |
29 | CMOS Battery, CR 2032, 3V | 100 pieces | |
30 | Temperature Gun Welding Soldering Iron | 2 units | |
31 | Soldering Lead, 60/40 | 4 rolls | |
32 | Flashlight, Waterproof, CREE LED W/ Long Throw Reflector | 2 units | |
33 | Suction Cup, Heavy Duty for MAC Computer repair | 4 units | |
34 | 13 in 1 Metal Spudger ,Double Head , Plastic Pry Tool set | 5 units | |
35 | Cable Punch Down Tool Termination tool OPT + PDT | 5 units | |
36 | Extension Cord
· 6-gang universal outlet with individual switch · with real grounding system connection for safety · with built –in safety circuit breaker · with built-in lightning protector · maximum wattage: 2500W · current: 10A · Voltage: 250 V · Cord Length: 3 Meters |
20 units | |
37 | Battery (Generator Set)-12 volts, 2D | 1 unit | |
38 | Portable Battery Charger 12V/24V | 1 unit | |
39 | Meter Tape, 5M | 2 units | |
40 | Multi Tester (Analog) | 4 units | |
41 | T25 Staples, 7/16″, Item #257 | 20 boxes | |
LOT 3: PROCUREMENT REQUEST ACTION SLIP (PRAS) NO.: 19-0238 – BAFE | |||
1 | Extension Cord (heavy duty)
|
21 pieces |
- FINANCIAL QUOTATION:
Item No. | DESCRIPTION | Quantity | CEILING FOR TOTAL PRICE
(PhP) |
UNIT PRICE
(PhP) |
TOTAL PRICE
(PhP) |
LOT 1: PRAS NO. 19-0169 – IAD | |||||
1 | Extension Cords | 6 pieces | 4,800.00 | ||
LOT 2: PRAS NO. 19-0212 – ICTS-NOMD | |||||
1 | Pentalobe Screwdriver, 5 point 5-star, P2, P3, P4, P5, P6 | 6 sets | 26,400.00 | ||
2 | Plastic Moulding, 1″ | 50 pieces | 8,250.00 | ||
3 | Plastic Moulding, 11/2″ | 250 pieces | 68,750.00 | ||
4 | PVC Electrical conduit pipe 3/4” | 15 pieces | 3,300.00 | ||
5 | Electronics Contact Cleaner, 12.9 oz | 20 cans | 9,900.00 | ||
6 | Penetrating Oil, 12.9 oz | 20 cans | 9,900.00 | ||
7 | LED Bulb, 13 Watts | 50 units | 19,250.00 | ||
8 | LED Flourescent Tube,T8, 36 Watts | 260 units | 429,000.00 | ||
9 | Faucet, ordinary, brass | 5 units | 1,650.00 | ||
10 | Torx, Precision Screw Driver, (T4-T10) | 5 units | 22,000.00 | ||
11 | Contact Cleaner, 16 Oz. | 40 cans | 26,400.00 | ||
12 | Super Glue | 24 pieces | 3,960.00 | ||
13 | Door Knob | 10 sets | 16,500.00 | ||
14 | Thermal Paste, 30 grams, Syringe | 24 units | 6,600.00 | ||
15 | Electrical Plier, 8″, U.S. | 5 units | 6,600.00 | ||
16 | Electrical Side Cutter Plier, 6″ U.S. | 5 units | 5,500.00 | ||
17 | Electrical Long Nose Plier, 6″ U.S. | 5 units | 5,500.00 | ||
18 | Screw Driver, Philip Screw Head #1 U.S. | 5 units | 2,200.00 | ||
19 | Screw Driver, Philip Screw Head, #3 U.S. | 5 units | 2,475.00 | ||
20 | Flat Screw Driver, 10″ U.S. | 5 units | 2,475.00 | ||
21 | Adjustable Wrench, #10 U.S. | 2 units | 1,760.00 | ||
22 | Paint Brush 4″ | 8 units | 880.00 | ||
23 | Hack Saw Blade | 5 units | 440.00 | ||
24 | 3 Prong Convenient Outlet w/ cover | 60 pieces | 16,500.00 | ||
25 | Electrical Wire, #18 Stranded | 2 boxes | 7,700.00 | ||
26 | THHN Wire #12 | 2 boxes | 8,800.00 | ||
27 | Flat Cord Wire #14 | 2 rolls | 9,900.00 | ||
28 | Electrical Plug, Male Heavy Duty | 60 pieces | 11,880.00 | ||
29 | CMOS Battery, CR 2032, 3V | 100 pieces | 5,500.00 | ||
30 | Temperature Gun Welding Soldering Iron | 2 units | 660.00 | ||
31 | Soldering Lead, 60/40 | 4 rolls | 1,760.00 | ||
32 | Flashlight, Waterproof, CREE LED W/ Long Throw Reflector | 2 units | 8,140.00 | ||
33 | Suction Cup, Heavy Duty for MAC Computer repair | 4 units | 3,520.00 | ||
34 | 13 in 1 Metal Spudger ,Double Head , Plastic Pry Tool set | 5 units | 3,300.00 | ||
35 | Cable Punch Down Tool Termination tool OPT + PDT | 5 units | 9,900.00 | ||
36 | Extension Cord | 20 units | 33,000.00 | ||
37 | Battery (Generator Set)-12 volts, 2D | 1 unit | 10,450.00 | ||
38 | Portable Battery Charger 12V/24V | 1 unit | 11,000.00 | ||
39 | Meter Tape, 5M | 2 units | 660.00 | ||
40 | Multi Tester (Analog) | 4 units | 2,640.00 | ||
41 | T25 Staples, 7/16″, Item #257 | 20 boxes | 6,600.00 | ||
Sub-Total | 831,600.00 | ||||
LOT 3: PRAS NO. 19-0238 – BAFE | |||||
1 | Extension Cord (heavy duty) | 21 pieces | 27,720.00 | ||
GRAND TOTAL | PhP 864,120.00 |
For the Bids and Awards Committee:
______________________________
ATTY. MICHAEL S. ANDAYOG
Head, BAC Secretariat
Sir/Madam:
In connection with the above request, I/We submit our quotation indicated above. I/We have carefully read and fully understand the minimum requirements and agree to furnish and/or delivery in conformity with specifications any or all said articles described above.
Signature Over Printed Name
|
Name of Company | Tax Identification Number
|
||
Telephone Number | Address
|
Date Accomplished | ||
Email Address |
Please see attached link for reference.