Masaganang Agrikultura, Maunlad na Ekonomiya!

NP-097-17 (R-2) Supply, Delivery, and Installation of Modular Workstation at Recovery Rehabilitation Support Office (RRSO) (Rice)

Author: DA-BAC | 10 October 2017

                                                                                                                                                                                                                               October 10, 2017

                                                                                        REQUEST FOR QUOTATION

                                                                                   NEGOTIATED PROCUREMENT

 

  1. MANDATORY REQUIREMENTS

 

  1. Certified True Copies of the following:

 

  • Valid Mayor’s Permit
  • BIR Certificate of Registration

 

Note: The proposal shall be accompanied by the aforementioned documents, otherwise, non-submission of which shall result to automatic disqualification of proposal.

 

  1. PhilGEPS Registration Number: ___________________________

 

  1. The Bidders/Suppliers may submit their own canvass form in accomplishing their bid proposals/quotations subject to the condition that the DA-BAC’s official canvass form shall be filled up (with the offered brand, unit price and total price), signed properly and attached together with the Bidder’s/Supplier’s own canvass form.

Please write legibly, non-compliance of which shall result to the automatic disqualification of proposal.

 

  1. The bidder is required to affix his/her signature across the flap of the sealed envelope, non-compliance of which shall result to the automatic disqualification of proposal.

 

  1. INSTRUCTIONS:

 

  1. Bidders are required to read the instructions and fill all the blanks properly.
  2. Any specifications other than those required/stated in this form shall not be considered in the evaluation of bid.
  3. Quotation/s must include all kinds of taxes for the item(s)/services listed hereunder, including delivery charges.
  4. Price quotation(s) submitted shall be valid for a period of THIRTY (30) days reckoned from the deadline for submission of quotations as reflected in the PhilGEPS.
  5. Terms of Payment – Thirty (30)working days after the complete installation of items, inspection and acceptance of the DA-Property.
  6. Quotation(s)/ Proposal(s) shall be submitted to the Office of the Procurement Division, at the 2nd Floor, ITCAF Building, Elliptical Road, Diliman Quezon City.
  7. Only sealed canvasses shall be considered by the BAC­
  8. Awarding shall be done by
  9. DEADLINE FOR SUBMISSION OF BIDS: October 13, 2017 @ 12:00 noon.
  10. Delivery Period: Forty-five (45) working days after the receipt of approved Work Order.
  11. Availability of Stocks: 60 days reckoned from instruction no. 9.
  12. The bidders shall reflect on the envelope the Solicitation no. and the PRAS/PR no., the BAC shall not be responsible on the pre-emptive/premature opening of the proposal.

 

           

            PR NO. 17-055                                                ABC: Php996,298.52                                            End – user:  RICE                                                                                                                                       

                                                                                Solicitation No. NP-097-17 (R-2)

 

Qty Unit ITEM/DESCRIPTION UNIT

COST

Offered
Brand / N/A-if not applicable
UNIT PRICE TOTAL PRICE

Supply, Delivery and Installation of Modular Workstation at Recovery Rehabilitation              Support office (RRSO)

 
   
15 units Partitions and Connectors:
Quarter Glass Laminated Panel 1500W x 1200H (mm)
modular, collapsible type, tile-look system, 47mm thick, aluminum frames (vertical and horizontal) in charcoal gray finish, PVC caps for panel accessories/connectors, 900mm H laminated finish, 300mm H clear glass, with adjustible glider at bottom to level height in uneven surfaces, with wiring management located at bottom to hide electrical and data cables
12,096.00  
14 units
Quarter Glass Laminated Panel 1200W x 1200H (mm)
modular, collapsible type, tile-look system, 47mm thick, aluminum frames (vertical and horizontal) in charcoal gray finish, PVC caps for panel accessories/connectors, 900mm H laminated finish, 300mm H clear glass, with adjustible glider at bottom to level height in uneven surfaces, with wiring management located at bottom to hide electrical and data cables
9,676.80  
4 units Quarter Glass Laminated Panel 900W x 1200H (mm)
modular, collapsible type, tile-look system, 47mm thick, aluminum frames (vertical and horizontal) in charcoal gray finish, PVC caps for panel accessories/connectors, 900mm H laminated finish, 300mm H clear glass, with adjustible glider at bottom to level height in uneven surfaces, with wiring management located at bottom to hide electrical and data cables
7,257.60  
               Qty Unit ITEM/DESCRIPTION UNIT

COST

Offered
Brand / N/A-if not applicable
UNIT PRICE TOTAL PRICE
26 units
Quarter Glass Laminated Panel 600W x 1200H (mm)
modular, collapsible type, tile-look system, 47mm thick, aluminum frames (vertical and horizontal) in charcoal gray finish, PVC caps for panel accessories/connectors, 900mm H laminated finish, 300mm H clear glass, with adjustable glider at bottom to level height in uneven surfaces, with wiring management located at bottom to hide electrical and data cables
4,838.40  
14 units two (2) way Connector
aluminum in powder coated finish
320.32  
23 units three (3) way Connector
aluminum in powder coated finish
331.52  
28 units End Profile
top and bottom profiles are made of anodized metal
215.05  
4 units Wall Bracket,
anodized metal
107.52  
15 units
L-Shape Worktop 1500/1200 x 600 x 25mm thick. Finished: laminated top, PVC flat edging, with grommet hole and cap for wire access/passage
4,948.16  
2 units Free Standing L-shaped desk 1800/1200x600x25mm thick. Finish: Laminated top, PVC flat edging, with grommet hole and cap for wire access/passage 12,977.44  
120 units Worktop Bracket,
anodized metal
107.52  
20 units
Mobile pedestal, 3 pull-out drawers, centralized locking mechanism, top drawer with PVC pencil tray, lowest drawer with plastic divider, all steel body in powder coated finish, wirh caster, recessed handles gauge; 20 Dimension: 400Wx560Dx650H (mm) color: light gray
3,152.80  
15 units High Back Executive Chair, polypropylene T-arms, with headrest,
pneumatic height adjustment, tilting mechanism with tension control,
five-pronged base nylon with casters color: black
Dimension: W arm-arm 48cm x Depth Seat – 54cm x H94cm
7,884.80  
6 units
Steel bookshelf, with adjustable shelves, sliding glass door for upper part, sliding steel doors lower part, both with locking mechanism, powder coated finish, Dimension: (900x400x1760mm H)color: light gray
12,843.04  
6 units Lateral Cabinet, 3 pull-out drawers, centralized locking mechanism, all drawers equipped with plastic dividers, full extension drawer guides, all steel body in powder coated finish, recessed handles, gauge 20, color: light gray, dimension: 900Wx450Dx1062H (mm) 13,694.24  
12 units Office Chair with polypropylene fixed loop arms, fabric upholstered seat and
back, moulded foam, reclining backrest, pneumatic height
adjustment (gaslift), five-pronged PVC base with casters
Color: black
Dimension: W arm-arm 60cm x Depth Seat – 49cm x H99cm
4,363.52  
GRAND TOTAL Php996,298.52  

 

NP 097-17 Terms of Reference

 

For the Bids and Awards Committee:

 

____________________________                                                    _______________________________

            PhilGEPS Posted                                                                          ASEC. ENRICO P. GARZON, JR. DVM

                                                                                                                          Vice-Chairperson, Bids and Awards Committee

 

____________________________

 

Chairperson, Bids and Awards Committee

____________________________

                   Canvasser

                                                         

The DA Bids and Awards Committee (BAC)

Elliptical Rd., Diliman Quezon City

 

SIR/MADAM:

 

In connection with the above request, I/We submit our quotation indicated above.  I/We have carefully read and fully understand the minimum requirements and agree to furnish and/or delivery in conformity with specifications any or all said articles described above within seven (7) days from receipt of Purchase Order/Work Order.

 

______________________________                   _______________________________               _______________________________

Signature Over Printed Name                                                                 Name of Company                                                       Tax Identification Number

 

______________________________                   _______________________________               _______________________________

Telephone Number(s)                                                                                  Address                                                                    Date Accomplished

 

E-mail Address of the Bidder: __________________________________
Back to Archives